Al Farid Wood and Metal Trading Company
8.00 AM -19.00 PM
seven days per week
+971 567 68 60 37

Aluminum welding rod

Aluminum welding rod
Al Farid Wood and Metal Trading Company sell various aluminium products in the UAE. The offered products are of high quality, reliability and durability. Our managers will help you choose the right products and place an order, and provide all the necessary advice. You will receive a comfortable full-cycle service, convenient forms of payment, low prices and a flexible system of discounts for regular customers.

Aluminium welding rod is a type of welding material in the form of a single drawn rod of aluminium-based alloys.

 

Specifications

It refers to the filler material of a continuous section. They differ in cross-sectional diameter, bar length, grade of the original alloy.

Welding type: argon arc (automatic, semi-automatic).

Differs in high corrosion resistance, durability.

Provides an even reliable weld seam that is resistant to oxidative processes, cracking, contact with moisture, variable temperatures.

Aluminium welding rod is used for welding aluminium metal structures, profiles,  frames, as well as welded capacitive equipment for the chemical, food, processing industry.

Aluminium welding rod for argon arc welding TIG ER 5356 / AlMg5

Description Type Mechanical properties Chemical composition, %
Aluminium welding rod, widely used for argon arc welding of profiles and metal structures from Al – Mg alloys containing> 3% Mg, such as AlMg3, AlMg4, AlMg5, AlMg6 with similar materials. On AC . Shielding gas – Ar. ER 5356 / AWS A5.10 Yield strength – 120 MPa
Strength – 265 MPa Elongation 26%		 Si < 0,25
Mn – 0,15
Cr – 0,12
Fe < 0,4
Mg – 5,0
Al – rest

Available diameters: 1.6 / 2.0 / 2.4 / 3.2 / 4.0   mm.

Bar length – 1000mm.

 

Aluminium welding rod for argon arc welding TIG ER 4043 / AlSi5

Description Type Mechanical properties Chemical composition, %
Aluminium welding rod, widely used for argon arc welding of cast Al – Si; Al – Si – Mg alloys (ICE blocks, base plates, frames, etc.) AC alternating current. Shielding gas – Ar. ER 4043 / AWS A5.10 Yield strength – 55 MPa
Strength – 165 MPa Elongation 18%		 Si – 5,0
Mn – 0,01
Zn – 0,02
Fe – 0,2
Al – rest

Available diameters: 1.6 / 2.0 / 2.4 / 3.2 / 4.0   mm.

Bar length – 1000mm.

 

Aluminium welding rod for argon arc welding TIG ER 5183 / AlMg4.5Mn

Description Type Mechanical properties Chemical composition, %
Aluminium welding rod, widely used for argon arc welding of Al – Mg alloys containing up to 5% Mg, Al – Mn alloys; non-hardened aluminium alloys used in the dairy industry. Also used in shipbuilding and in welding of structures in contact with sea water. An alternating current AC. Shielding gas – Ar. ER 5183 / AWS A5.10 Yield strength – 140 MPa
Strength – 290 MPaElongation 25%		 Si < 0,2
Mn – 0,8
Cr – 0,1
Fe < 0,4
Mg – 4,8
Al – rest

 

Welding rod type Classification Chemical composition Seam mechanical properties
OK Tigrod 1070 (OK Tigrod 18.01) S Al 1070 Si <0,2 Yield point 35 Mpa
Aluminium bar, resistant to chemical and atmospheric agents. Used for welding pure aluminium, ductile aluminium alloys. Possesses good welding characteristics. Мп < 0,03 Strength 75 Mpa
Shielding gas: Ar, mixture  Ar/He, He. EN ISO 18273 Zn <0,04 Elongation 33%
Fe <0,25
Diameter  ø 1,6; 2,4; 3,2; 4,0 ; 5,0 mm V <0,05
Си <0,04
Ti <0,03
Аl >99,7
OK Tigrod 4043 (OK Tigrod 18.04) ER 4043/ Si -5,0 Yield point 55 Mpa
Aluminium rod, widely used for welding foundry Al-Si containing up to 7% Si; Al-Si-Mg type alloys (ICE blocks, base plates, frames, etc.). Not recommended for thicknesses greater than 20 mm. At thicknesses of 10 mm or more, heating to 150–200 ° C is necessary to reduce the probability of pore formation. AWS A5.10 Мn <0,05 Strength 165 Mpa
Shielding gas: Ar, mixture  Ar/He, He. S Al 4043 Zn <0,10 Elongation 18%
(Al Si5) / Fe <0,6
Diameter  ø 1,6; 2,4; 3,2; 4,0 ; 5,0 mm EN ISO 18273/ Cr <0,5
S Al 4043A Сu <0,05
Ti <0,15
Аl rest
OK Tigrod 1450 (OK Tigrod 18.11) S Al 1450 Si <0,25 Yield point 40 Mpa
Aluminium bar, resistant to chemical and atmospheric agents. Provides a seam with high resistance to cracking. (Al 99,5 Ti)/ Мп <0,05 Strength 90 Mpa
A slight addition of titanium gives fine grain seam very good shape. It is used for welding aluminium and its alloys in the aircraft industry and food industry. Not recommended for thicknesses greater than 20 mm. At thicknesses of 10 mm or more, heating to 150–200 ° C is necessary to reduce the probability of pore formation. Shielding gas: Ar, Ar / He mixture, He. EN ISO 18273 Zn <0,07 Elongation 35%
Fe <0,40
Diameter  ø 1,6; 2,4; 3,2; 4,0 ; 5,0 mm Ti 0,15
Сu <0,05
Аl >99,5
OK Tigrod 5356 (OK Tigrod 18.15) ER 5356/ Si <0,25 Yield point 120  Mpa
Aluminium rod, widely used for welding profiles and metal structures of Al-Mg alloys containing> 3% Mg. Not recommended for thicknesses greater than 20 mm. At thicknesses of 10 mm or more, heating to 150–200 ° C is necessary to reduce the probability of pore formation. AWS A5.10 Мn 0,15 Strength 265 Mpa
Shielding gas – Ar / He. S Al 5356 Ее <0,40 Elongation 26%
Diameter  ø 1,6; 2,4; 3,2; 4,0 ; 5,0 mm Mg – 5,0
EN ISO 18273 Cr 0,13
Сu <0,10
Ti  -0,11
Zn <0,10
Al rest
OK Tigrod 5183 (OK Tigrod 18.16) ER 5183/ Si <0,4 Yield point 140  Mpa
Aluminium rod for welding Al-Mg alloys containing up to 5% Mg; Al — Mn alloys; non hardened aluminium alloys used in dairy
industry. Also used in shipbuilding, and in welding structures in contact with sea water. Recommended for welding structures operating under alternating loads. To reduce the likelihood of pore formation, you can preheat to 65 ° C.		 AWS A5.10 Mn  – 0,8 Strength 290 Mpa
Shielding gas – Ar / He. S Al 5183 Fe <0,40 Elongation 25%
(Al Mg 4,5Mn Mg – 4,8
Diameter  ø 1,6; 2,4; 3,2; 4,0 ; 5,0 mm 0,7(A))/ Cr  – 0,15
EN ISO 18273 Сu <0,10
Ti <0,15
Zn <0,25
Аl rest
OK Tigrod 5556 (OK Tigrod 18.20) ER 5556/ Si <0,25 Yield point 145  Mpa
Aluminium rod is widely used for welding Al-Mg alloys containing up to 5% Mg. Designed to produce highly durable T-joints. Ensures the strength of the seam is twice as high as when welding OK Tigrod 4043, and also provides both high strength and ductility of the seam and its resistance to corrosion and cracking. Used in welding of high-strength structures in contact with sea water. Not recommended for thicknesses greater than 20 mm. AWS A5.10 Мn  – 0,7 Strength 295 Mpa
At a thickness of 10 mm or more, heating to 150–200 ° C is necessary to reduce the probability of pore formation. S Al 5556A Fe  -0,2 Elongation 25%
Shielding gas: Ar, Ar / He mixture, He. (Al Mg 5 Mn )/ Mg – 5,2
EN ISO 18273 Al rest
Diameter  ø 1,6; 2,4; 3,2; 4,0 ; 5,0 mm

 

 

The size, price and range of aluminium bars are constantly updated, so please contact our managers to place your order quickly and correctly.

To get the price please send us a request for quotation with the required size, quantity and material of the goods.

Dear Friends, If you want to be aware of the latest news in the UAE market of non-ferrous metals, receive information about new products, properties of metals, expert advice, subscribe to our newsletter now!!!

Only useful and necessary information.

With Best Regards,

AL Farid Wood and Metal Trading Company Team

Quotation request

Product Navigation

Product testing in the laboratory of spectral and chemical analysis to confirm the chemical composition of the alloy

Free technical support of metallurgical engineers regarding the application of alloys

Latest news
0