Air-conditioning and refrigeration systems are the second most popular AC Copper Pipe Dubai, size ⅜, application. It is used as a route for refrigerant fluids to circulate among system components and to prevent any leakages to the atmosphere. On a more frequent basis Copper Pipe is being used in fire sprinkler systems. It is also harnessed to distribute all kinds of gases (medical, natural and LP). Dubai, UAE
AC Copper Pipe Dubai, UAE, size ⅜ inch, 9.52 mm, advantages:
Compact and homogeneous structure.
High corrosion resistance.
High durability in non-acidic environment.
Oxidizing agents and external atmospheric effects inaction.
Excellent flexibility and vibration resistance.
High and low (up to -70 ° C) temperatures resistance.
Superior heat-exchange efficiency.
High dimensional precision.
Super brightness and high cleanliness of inlet and outlet surface.
Welding ease.
Ease of use and good formability.
High reliability, long operating period.
Due to the fact that AC Copper Pipe Dubai, size ⅜, not only facilitates ease of installation, but also maximizing cost efficiency and productivity, it is so extensively used nowadays.
AC Copper pipe Dubai, UAE, size 3/8 inch,9.52 mm applications
Copper is a good material in terms of thermal characteristics. So, for example, the thermal conductivity of copper in the temperature range from 0C to 100C lies in the range of 390 W / (m * K). This is the highest among the relatively cheap and affordable materials. Silver has a higher thermal conductivity, but it is an expensive material. That is why all the heat exchangers of the refrigeration circuit are made of copper pipes, so that the heat exchange processes between different environments take place with minimal loss. Another, certainly, positive quality of copper is its good resistance to corrosion. Copper in contact with atmospheric air over time quickly enough coated with a protective film of oxide. It is it that allows you to protect the outer surface of pipes from corrosion in contact with the external environment.
How to install ac copper pipe Dubai, UAE size 3/8, 9.52 mm?
Methods
To ensure the integrity of the structure use these methods of assembly:
soft or hard soldering;
mechanical connection (assembly using fittings);
a combination of several types of connections.
Mechanical connection
The algorithm for mounting copper tubes is as follows:
identify the need to install an oil trap on the route (for a route with a height difference between blocks of more than 5 meters);
measure the required length of the tubes and cut them to size (preferably leave a small margin in case of an unsuccessful roll);
put on the reverse nuts and roll the ends of the tubes;
remove burrs using a reamer;
bend the tubes and put them in a straw or decorative box, organize oil traps.
Soldering
This process is based on the capillary effect. In this case, the solder layer is laid evenly along the cross-section of the copper pipe. Also in the process, special fittings are used, which are selected separately for each diameter of the pipe roll.
Very important
Be careful with the size, as the tubes are different: “copper pipe 1/2 size”, “copper pipe 1/4 size” and so on. Read the information about the purchased air conditioner in detail before ordering pipes to avoid mistakes.
Do not use metal cutting tools when working with air conditioner tube. Metal shavings can get into the cooling system and clog the tube opening. In this case, the air conditioner will definitely break.
Technical specifications for copper pipe Dubai, 9.52 mm, UAE
The main indicators for the selection of the required products are the diameters of ac pipes for air conditioners. The rate of circulation of the refrigerant through the system depends on their value. In addition, a well-defined cross-section will significantly reduce pressure losses in units that cool the air.
Copper tubes have a diameter of 0.6 to 26.7 cm. In climate technology, conditioner copper pipes are usually used with a size of 19.05, 6.35; 12.7; 9.52 and 15.88 mm (which corresponds to 3/4, ¼, ½, 3/8 and 5/8 inches). The standard minimum value of the product wall thickness for climatic equipment is 0.7 mm, however, in the general case, the parameter can vary from half a millimeter to 0.3 cm.
