Tested and ISO certified product
Copper Tube is extensively harnessed to convey potable water in residential and non-residential buildings. It also helps to provide water for different non-potable uses like making coffee and cooking meals, watering plants, cleaning cars and other vehicles, washing clothes or flushing toilets. Copper alloys are preferable for delivering fluids for diverse industries including marine, chemical, oil and process ones. Dubai, UAE
Make an order of our product at Amazon.ae and get your order delivery tomorrow!
Tested and ISO certified product
Copper pipe, copper tubing parameters
Cu (Min): 99.99%
Hardness: soft condition
Phosphorus content (≤%): 0.015
Elongation (≥ %): 54
AC Copper Pipe Dubai, UAE, size1/4, 6.35 mm advantages:
Due to the fact that AC Copper Pipe, size ⅜, not only facilitates ease of installation, but also maximizing cost efficiency and productivity, it is so extensively used nowadays.
Copper is a good material in terms of thermal characteristics. So, for example, the thermal conductivity of copper in the temperature range from 0C to 100C lies in the range of 390 W / (m * K). This is the highest among the relatively cheap and affordable materials. Silver has a higher thermal conductivity, but it is an expensive material. That is why all the heat exchangers of the refrigeration circuit are made of copper pipes, so that the heat exchange processes between different environments take place with minimal loss. Another, certainly, positive quality of copper is its good resistance to corrosion. Copper in contact with atmospheric air over time quickly enough coated with a protective film of oxide. It is it that allows you to protect the outer surface of pipes from corrosion in contact with the external environment.
To ensure the integrity of the structure use these methods of assembly:
The algorithm for mounting copper tubes is as follows:
This process is based on the capillary effect. In this case, the solder layer is laid evenly along the cross-section of the copper pipe. Also in the process, special fittings are used, which are selected separately for each diameter of the pipe roll.
Be careful with the size, as the tubes are different: “copper pipe 1/2 size”, “copper pipe 1/4 size” and so on. Read the information about the purchased air conditioner in detail before ordering pipes to avoid mistakes.
Do not use metal cutting tools when working with air conditioner tube. Metal shavings can get into the cooling system and clog the tube opening. In this case, the air conditioner will definitely break.
The main indicators for the selection of the required products are the diameters of ac pipes for air conditioners. The rate of circulation of the refrigerant through the system depends on their value. In addition, a well-defined cross-section will significantly reduce pressure losses in units that cool the air.
Copper tubes have a diameter of 0.6 to 26.7 cm. In climate technology, conditioner copper pipes are usually used with a size of 19.05, 6.35; 12.7; 9.52 and 15.88 mm (which corresponds to 3/4, ¼, ½, 3/8 and 5/8 inches). The standard minimum value of the product wall thickness for climatic equipment is 0.7 mm, however, in the general case, the parameter can vary from half a millimeter to 0.3 cm.
More information https://en.wikipedia.org/wiki/Copper_tubing
Other products How to install a copper pipe?